10/100M Media Converter

We supply 10/100M Media Converter for both dual fiber type and single fiber type. These 10/100M media converters are economic and convenient to use as copper to fiber devices in 10/100M Ethernet. The 10/100M dual fiber converters have single mode type and multimode type, they are the most commonly used converters and they are cheap. The 10/100M single fiber media converters have only single mode type and this converter use WDM technology to transmit and receive signal via the same optical fiber.

10/100M Dual Fiber Media Converter

Description
10/100 base dual fiber Series Optic Fiber Media Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 120km through optical fiber link.This Series products with reasonable price are especially designed for network users.
 
Main features
1. Auto negotiation function allows UTP port to select the transmission mode of 10/100M and Full
Duplex or Half Duplex.
2. UTP port supports MDI / MDI-X auto crossover.
3. Multiple optical interface to be chosen: SC, ST or FC, singlemode / multimode
4. Supporting 1552 Byte packet
5. Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
6. Design of internal or external power supply for selection by users
 
Technical Specifications
* Operating standards: IEEE802. 3u, 10/100Base-TX and 100Base-FX
* MAC address table: 1K
* Connector: UTP: RJ-45 10/100Mbps; Fiber: ST/SC/FC 100Mbps
* Cable:
UTP: Cat. 5 UTP (the max distance up to 100m)
Fiber ( Multimode): 50/125, 62. 5/125μm(the max distance up to 2km or 5km)
Fiber ( Singlemode): 8. 3/125, 8. 7/125, 9/125, 10/125μm(the max distance up to 20 -120km)
* Flow Control
Full Duplex: Supporting standard IEEE802. 3x
Half Duplex: Back pressure
* LED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.
* Power: AC 170 ~ 240V; DC 5V.
* Ambient Temperature: 0 ~ 70º C
* Humidity: 5 ~ 90%

10/100M Single Fiber Media Converter

Description
10/100M Singlemode Single Fiber Media Converter can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). It could extend traditional 10/100M Fast Ethernet to the distance of 90km through single optical fiber link. It is with stable performance and good quality by adopting latest IC from USA and Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 
 
Main features
1. The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.
2. Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex
3. The UTP port supports MDI/MDI-X auto crossover. 
4. Supporting 1600 bytes packet for management. 
5. Internal circuit of prevented thunder could greatly reduce damage of onverters caused by thunderbolt induction.
6. Indicator function of link fault (LFP): When optical fiber is at fault, the converter could stop all the link.
7. Converter working mode could be chosen: Store and forward switch mode,modified cut-through switch mode, or Converter mode.  
 
Technical Specifications
* Operating standards: IEEE802. 3u, 10/100Base-TX and 100Base-FX;
* MAC addresses table: 1K
* Data buffer: 128K.
* Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: SC, 100Mbps 
* Cable:
UTP: Cat. 5 UTP cable (the max distance up to100m)
Fiber ( Singlemode): 8. 3/125, 8. 7/125, 9/125, 10/125μ M(the max distance up to 90km)
* Flow Control
Full Duplex: IEEE802. 3x
Half Duplex: Back pressure

USD/Unit : Contact Us